0707.16 Agricultural Spare Parts Crown Gear for Baler

Characteristic The driver-side crown gear 20 is installed at the output shaft 35. It is separate from the hub 7, which can be fabricatedseparately. The hub is then attached to the driver-side crown gear 20 through welding. The crown gear is mounted at thedriver-side end of the output shaft 35, which......

Send Inquiry

Product Description

Characteristic

The driver-side crown gear 20 is installed at the output shaft 35. It is separate from the hub 7, which can be fabricated
separately. The hub is then attached to the driver-side crown gear 20 through welding. The crown gear is mounted at the
driver-side end of the output shaft 35, which drives the parts of the bale-forming device. This article describes the driver-side crown gear 20. It will be useful for all Welger balers, from small to large-sized.
Free-wheel clutch secures the output shaft 35
A free-wheel clutch is a mechanical device that secures the output shaft 35 and other parts of a Welger Baler. A free-wheel clutch prevents shaft damage by transferring rotational motion to the bale-forming device. In one embodiment, the free-wheel clutch includes a hub 7 that has a toothed inner surface, and it is coupled to a rotatable driving member. The hub 7 rotates along with the shaft 35 to secure the output shaft.
Driver-side crown gear 20
The Driver-side crown gear 20 for WelGER Balers is an essential upgrade to any Welger baler. This belt has a patented design that improves performance and ensures smooth operation. This belt has an effective lubrication system and is easily adjustable. It is also available in a low-cost base model. A lubricated chain is required to keep the drive belt running smoothly. The chain is equipped with 50mm bearings.
Load-threshold clutch disengages the output shaft 35
A load-threshold clutch is a device that automatically disengages the output shaft 35 of a Welger baler. The device is mounted on a hub 7 and has protruding driving elements with straight front faces and angled rear faces. These protruding elements rotate with the output shaft 35 in a clockwise direction Dr.
Forming-side output shaft 35 drives parts of the bale forming device Crown Gear For Welger Baler is a gearbox that drives parts of the bale forming device. The drive shaft 35 rotates the hub 7, which drives chain wheel 1 on the forming-side output shaft. The chain wheel is then moved in a specific direction to form the bale. The chain wheel 11 moves along several chains of the bale forming device.
Shaft end piece 56 does not rotate with respect to shaft end piece 54
Shaft end piece 56 does not rotate with relation to shaft end plate 54. The shaft end piece 56 is fixed on the back plate 56. The supporting frame 54 rotates with respect to the shaft end piece 54. This configuration allows the rotating stop 40 to be driven by the main shaft 18 through the mating teeth 34 and 38. In addition, it reduces the manufacturing cost and enhances the durability of the shaft and supporting frame.
Reliability of the construction
The Welger RP series features a mechanical locking system that safeguards the maximum baling pressure. This model's
high-performance right-angle transmission gearbox is fully enclosed, so it is able to withstand high speeds while remaining maintenance-free. Its Hydroflexcontrol system, two-step transmission system, and curved teeth increase its wear-resistance. The rear of the feed table floor is easily accessible from the tractor seat.
Operation of the control unit
The output shaft 35 of the Crown Gear For Welger Baler cannot rotate radially and axially, but the output shaft 7 may do so. The chain wheel 1 rotates along the chain wheel hub 7 due to the angular rear faces 26. When the chain wheel 1 stops rotating, the driver-side crown gear 20 and follower-side crown gear 21 engage in a tangential position, transferring rotation to the chain wheel 11. Consequently, the driver-side chain wheel reaches the output shaft 35, where the chain wheel 11 is mounted.

Click here for more details!

Please click on the photos below to visit their websites.

Q:What is the strength of your company?
A:We have a engineer team,who have well experienced on products and machine designs.We can help you to solve the problem you meet.

Q:How about you quality?
A:We have our own prcoessional factory and worker,so believe that our products have advange over our competitors.

Q:What is you MOQ?
A:Minimum order quality is 1 piece.

Q:Could you produce customized product according to your drawing or sample?
A:Yes.We have abundant experience in the production of non-standard products.

Packaging:
Chain+Plastic Bag+ Carton+Wooden case( If you have other requirements, we can customized according to customer requirements packaging. )

Shipping :
1.Most of the standard ones are in stock which we can send in 3-10 days after inspection and package.
2. Customized products delivery time should be determined according to the number.

Hot Tags: 0707.16 Agricultural Spare Parts Crown Gear For Baler - Buy Agricultural Spare Parts crown Gear For Welger Baler spare Parts Crown Gear For Welger Baler Product on Raydafon